|
|
LABORATORY PLASTICWARE
- Pipette Stand
We are worldwide manufacturers, suppliers, Exporters of Pipette Stand. MCP
Pipette Stand are being exported in huge quantities to many countries. Please have look at our range and ask for the quotes. We will be glad to quote even for small quantities.
PIPETTE
STAND (HORIZONTAL)
This
detachable Stand can hold 12 pipettes, 6 on each side in a horizontal
position. Moulded in Polypropylene this autoclavable stand has two sides
which are attached to each other with three metallic rods coated with
Polypropylene. This stand can be easily disassembled for space saving
storage.
Material : Polypropylene
|
View
Large
|
|
PIPETTE
STAND (VERTICAL)
This is a stable
non-corrosive, detachable Stand which can hold 28 pipettes with maximum
dia 14 mm. The heavy base measures 225 mm in diameter and a Polypropylene
coated square rod measuring 375 mm in length is screwed into the base. The
top disc that can be fixed on the rod has holes for holding pipettes while
the lower one has pilot holes where the pipette tips rest and liquids
drain down to the base. These discs can be adjusted on the rod according
to the length of the pipette. The arrows provided on the discs should be
kept parallel to ensure that corresponding holes are being centered.
Material : Polypropylene
|
View
Large
|
|
PIPETTE
STAND (94 PIPETTES - ROTARY)
Moulded in Polypropylene,
this unique Stand holds a maximum of 94 pipettes and rotates on a central
vertical axis for convenient selection of any particular pipette. The
lower rotating disc has four concentric troughs with tapered sides and
open bottoms which cradle the pipette tips protectively and permit with
the bottom disc and keeps the pipettes vertical. Liquids draining off the
pipettes are retained on the top of the stationary base by the outer ring.
This stand can be easily disassembled & reassembled.
Material : Polypropylene
|
View
Large
|
|
| MICRO PIPETTE STAND Z TYPE
|
View
Large
|
|
| |
|
|
|
