ORTHOPEDIC IMPLANTS - Plates for 4.5 mm & 6.5 mm Screws

We are worldwide manufacturers, suppliers, Exporters of Plates for 4.5 mm & 6.5 mm Screws. MCP Plates for 4.5 mm & 6.5 mm Screws are being exported in huge quantities to many countries. Please have look at our range and ask for the quotes. We will be glad to quote even for small quantities.      

Straight Reconstruction Plate 4.5 mm  Note : Do Not bend more than 15°. Fixation with 4.5 & 6.5 mm Screws. Item Code Description OR049  Thickness - 2.8 mm  Width - 12.0 mm  Hole Spacing - 16.0 mm  Length : 5 Hole to 24 Hole  Request Quote
Semi - Tubular Plate 4.5 mm  Fixtion with 4.5 mm Cortical screws. A compression effect can be achieved by eccentric Positioning of the screws remote from the fracture line. Item Code Description OR038  Thickness - 2.0 mm  Width - 11.0 mm  Hole Spacing - 16.0 and 26.0 mm  Length : 4 Hole to 12 Hole Request Quote
LC - DCP 4.5 mm, BOARD Fixation With 4.5 and 6.5 mm Screw. The LC- DCP holes allow compression in both direction of the longitudinal axis. The end holes can be used for cancellous bone screws. undercuts : For reduced vascular daage.  Indication : As a tension band plate on the femur and for Humeral Pseudarthrosis. (Not intended for the Tibia)  LC-DCP = Limited Contact Dynamic Compression Plate. Item Code Description OR026 Thickness- 5.0mm  Width - 16.0 mm  Hole Spacing - 18.0 mm  Length : 4 Hole to 18 Hole Request Quote
LC - DCP 4.5 mm, Narrow  Fixation With 4.5 and 6.5 mm Screw. The LC- DCP holes allow compression in both direction of the longitudinal axis. The end holes can be used for cancellous bone screws. undercuts : For reduced vascular daage.  Indication : As a neutralisation and tension band plate on the tibia.  (Not intended for the Tibia)  LC-DCP = Limited Contact Dynamic Compression Plate. Item Code Description OR025  Thickness- 4.0mm  Width - 12.0 mm  Hole Spacing - 18.0 mm  Length : 4 Hole to 16 Hole  Request Quote
DC Plate 4.5 mm, BROAD Fixation With 4.5 and 6.5 mm Screw. All holes are designed as self - copressing holes. All the end holes are designed for cancellous bone screws.  Indication : As a tension band plate on the femur and for humeral pseudoarthrosis (Not intended for the Tibia)  Use board plates with six or seven holes in exceptional cases only, e.g. on the humerus. Item Code Description OR031 Thickness- 5.0mm  Width - 16.0 mm  Hole Spacing - 16.0 mm and 25.0 mm  Length : 4 Hole to 20 Hole Request Quote
DC Plate 4.5 mm, Narrow Fixation With 4.5 and 6.5 mm Screw. All holes are designed as self - copressing holes. All the end holes are designed for cancellous screws.  Indication : As a neutralisation and tension bandplate on the tibia.  (Not intended for the Femur.)  Item Code Description OR030 Thickness- 4.0mm  Width - 12.0 mm  Hole Spacing - 16.0 mm and 25.0 mm  Length : 4 Hole to 18 Hole  Request Quote
T - Buttress Plate 4.5 mm With double bend, as buttress for tibial head fractures. Fixation with 4.5 & 6.5 mm Screws. Item Code Description OR043 Thickness- 2.0mm  Width - 17.0 mm  Length : 4 Hole to 14 Hole Request Quote
T - Plate 4.5 mm Shaft with round profile, for humeral and tibial head.  Fixation with 4.5 & 6.5 mm Screws.  Item Code Description OR042 Thickness- 2.0mm  Width - 17.0 mm  Length : 3 Hole to 14 Hole Request Quote
Condylar Plate 95° for Adults  With DCP dynmic compression holes and slot for tension device. All condylar plates have an angle of 95° between blade and shaft. The two holes next to the blade are suitable for .5 mm cancellus bone screws, all other holes are self - compressing holes. Fixation with 4.5 mm & 6.5 mm Screws. For fractures in the distal and proximal feoral region as wall as for interrochanteric valgue osteotomy. Item Code Description OR034 Thickness - 5.8 mm  Width - 16.0 mm  Hole Spacing - 16.0 mm  Length : 5 Hole to 18 Hole  U-Profile Blade - 6.5 mm * 16.0 mm  Blade Length : 50 mm to 80 mm  Request Quote
L - Buttress Plate 4.5 mm With double bend, as buttress for tibial and humeral head fractures. Left angled for right leg & right angled for left leg. Item Code Description OR044 Thickness- 2.0mm  Width - 16.0 mm  Length : 3 Hole to 14 Hole Request Quote
Condylar Buttress Plate 4.5 mm With DCP dynamic compression holes and slot for tension device. As buttress for the frmoral condylar with multiple fragment fracturess. Item Code Description OR036 Thickness- 5.0mm  Width - 16.0 mm  Hole Spacing - 16.0 mm  Length : 6 Hole to 16 Hole Request Quote
Lateral Tibial head Buttress Plate 4.5mm Fixation with 4.5 & 6.5 mm Screws shaft with DCP dynaic compression holes and slot for tension device. Left angled for right leg and right angled for left leg. Item Code Description OR037  Thickness- 4.5mm  Width - 14.0 mm  Hole Spacing - 16.0 mm  Length : 5 Hole to 16 Hole Request Quote
Angled Blade Plate 130° For Adults With DCP dynamic copression holes and slot for tension device (from 6 holes up) These plates have an angle of 130° between blade and shaft. Fixation with 4.5 mm cortical screws. For feoral neck and pertrochanteric fractures. Item Code Description OR035 Thickness- 5.8mm  Width - 16.0 mm  Hole Spacing - 16.0 mm  U - Profile Blade - 6.5 mm * 16.0 mm  Blade Length : 50 mm to 80 mm  Length : 4 Hole to 12 Hole  Request Quote
DHS Plate With DCP dynmic compression holes and slot for tension device.  Fixation with 4.5 mm Cortical Screws. For Pertrochanteric and intertrochanteric fractures. Item Code Description OR032  Thickness - 5.8 mm  Width - 19.0 mm  Hole Spacing - 16.0 mm  Length : 4 Hole to 16 Hole  Outer Small Fragment Implants, manufacturers, exporters, suppliers, IndiaBarrel Diameter : 12.5 mm  Barrel Length : 38.0 mm  Short Barrel Length : 25.0 mm  Angle : 125° , 130° , 135°  Request Quote
DCS Plates 95°  With DCP dynamic compression holes and slot for tension device.  Fixation with 4.5 mm & 6.5 m Screws. Two Hole to the Plate. For Condylar fracture, avoids further damaage to the bone. Item Code Description OR033 Thickness- 5.8 mm  Width - 16.0 mm  Hole Spacing - 16.0 mm  Length : 4 Hole to 18 Hole  Barrel Length : 25 mm Request Quote
Compression screw For use with DHS And DCS Screw Hexgonal Socket - 3.5 mm  Item Code Description OR021 Compression screw Request Quote
DHS / DCS Screw  Item Code Description OR020 Thread diameter - 12.5 mm  Thread length - 22.0 mm  Shaft Diameter - 8.0 mm  Length : 50 mm to 100 mm Request Quote

HOME       ABOUT US       ENQUIRY       CONTACT US       REQUEST QUOTE